Home Blog Lifestyle The Ways to Install Garage Door Opener

The Ways to Install Garage Door Opener

Install Garage Door Opener

Tired of opening your garage door by hand? Take a stab at installing a garage door opener yourself as opposed to paying another person to do it. Installation should just take you a couple of hours to finish and having a garage door opener will make opening and shutting your garage door consistently so a lot speedier and simpler. 

What amount of time it requires to install a garage door opener relies upon a couple of variables, however, you should rely on at any rate a large portion of a day or around 4–6 hours. It’s one of those positions that takes significantly more to do the first run-through on the grounds that you need to get comfortable with all the parts and characteristics of the particular model of the opener. In the event that you end up being installing more than one opener, the subsequent one may take you about a fraction of the time as the first. The half-day time gauge expects that you have a reasonable electrical source installed in the ceiling of your garage. Most openers need a grounded source inside a few feet of the engine unit, and you can’t associate the opener utilizing an additional string.

Choose the right garage door opener

When purchasing a garage door opener, pick a 1/3 hp or 1/2 hp garage door opener for a solitary garage door (1/3 hp can be elusive at some home places). Go with 1/2 hp for a twofold door and 3/4 hp for a door that has a wood or artificial wood overlay (they can be weighty!). Openers have a set opening pace, so installing an opener with a higher torque won’t open your door any quicker. 

Garage door openers are accessible with a chain drive, screw drive, or belt drive. Chain drives (a long chain pulls the door open and shut) are the most economical, however, they’re uproarious. Screw drives (a since quite a while ago strung pole drives a component that opens and shuts the door) are valued in the mid-range. They require the least maintenance, however, they’re not as peaceful as belt drives. Belt drives (an elastic belt opens and shuts the door) are the calmest, settling on them the most ideal decision on the off chance that you have living space over the garage. They’re likewise the most costly.

Making the Job Faster

Perhaps the greatest factor deciding what amount of time it requires to install a garage door opener is whether you’re supplanting an old opener or installing another unit where there is no current opener. In case you’re supplanting an old opener with a comparative kind of new opener, you can almost certainly reuse the current backings that hold the engine unit just as the wood hindering for the section over the door. Nonetheless, don’t attempt to save time by reusing electrical segments, for example, the safety sensor “eyes” or any wiring. The new hardware is probably going to be more compelling than the old gadgets, and they’re intended for use with the new opener. Old wiring may have worn, harmed, or fragile insulation and should be supplanted.

Replace all the components

Try not to be enticed to reuse the old photoelectric eyes and divider button (opener button). The new photograph eyes and divider catches are intended to work with your new opener. 

If the wires that run from your opener to the photo eyes and to the divider button are uncovered, supplant them, as well. Those wires have presumably been in your garage for a very long time or more, and they might be scratched or worn. Fresher openers are very touchy and won’t work if a wire is harmed. It just requires around 15 minutes to run the new wire, so it’s time very much spent. If the wires are secured inside the divider, you don’t have to run new wires.

Factors to Consider

Homeowners buying another garage door opener ought to consider a few components prior to settling on a choice on an expert install.

  • Time – Installing another Metal Garage door opener ordinarily requires 2–4 hours yet can be altogether more or more limited relying upon the intricacy of the installation. In the event that you are basically supplanting a current unit, as a rule, the current hanging equipment can be saved and utilized for the new unit. This eliminates the task time, just as the degree of intricacy. Then again, a pristine installation requires stud-finding, and wiring, all of which will take additional time than a basic substitution. In the event that you have a restricted measure of time to designate to this undertaking, it very well might be smarter to bring in an expert installer.
  • Level of Expertise – Metal garage door openers require essential carpentry and electrical information to install. A large portion of the devices required are fundamental hand devices that most mortgage holders have available to them, however on the off chance that you don’t have the instruments or are new to essential development standards, it is suggested that an expert installer be employed for the work.
  • Amount of Assistance – Installing a Genie garage door opener is normally a two-man work. There is some lifting and moving required to accurately adjust and mount the unit on the ceiling. This is most effectively achieved with the help of a couple of partners. In the event that you don’t have anybody to help you during the install, it very well might be smarter to enlist an expert installer.
  • Door Adjustments –In some cases, the garage door may require extra changes before an opener can be securely installed. A Metal garage door that doesn’t work easily when physically worked may cause gives later on. It might put additional strain on the administrator and influence the dependability of the framework. On the off chance that your door doesn’t appear to work easily, it is ideal to call an expert installer who can make any fundamental changes in accordance with guarantee legitimate and safe activity of the door and the opener.


Installing a garage door opener is a venture that numerous property holders can finish all alone to reduce work expenses. Metal makes DIY installation simple by giving various installation and investigating assets, a comprehensive rundown of pre-installation contemplations, shading coded equipment packs with comparing installation guidelines, and adaptable programming choices for every opener model.

Author Bio

Kevin Brown

Kevin writes for Home Decor, Lifestyle, Metal Buildings, and Real estate-related topics additionally; he has a passion for the recreation and design industry for more than ten years. Kevin has become an experienced Redesign in this industry. His goal is to help people with his vast knowledge to assist them with his best suggestions about different: Prefab Metal Buildings, Metal Carports, Metal sheds, Metal Garages.

Exit mobile version